EVP 355/B

EVP 355/B


Project Description

Minimum operating temperature - 20 ° C, Maximum + 60 ° C.

ATEX mode is not suitable for this fan category for structural reasons.

ErP : These fans are within the scope of Directive 2009/125 / EC. This law does not apply in the following cases:
- Operation in potentially explosive atmospheres (ATEX)
- Operation at high temperatures (fans designed with cooling fan)
- Operation at temperatures below -40°C

- Working in toxic, corrosive or corrosive environments (use of materials such as AISI 304, AISI 316, manganese steels).
These series are axial fans and therefore Ntarget = 50 is expected (Reg. UE N.327 / 2011).
Efficiency IE2 motors conforming to IEC 60034-30 are taken into account in ErP calculations.

HAVA AKIMI

V = 1.320 ÷ 8.500 M3/SAAT

BASINÇ

PT =  4 ÷ 45 KG/M2

Product Technical Information

AIR FLOW 62 – 96 m3/min
INPUT PRESSURE 20 – 38 kg/m2
OUTPUT PRESSURE 22 – 40 kg/m2
ENGINE BOARD 80 A – 2 poles
INSTALLED POWER 0.75 kW
ROTATION SPEED 2800 rpm
SPEED LIMIT 2850 rpm
LIQUID TYPE Clean
INLET FLANGE ⌀355mm
OUTLET FLANGE 355 x N/A mm
WEIGHT WITHOUT MOTOR 11.5 Kg
SE 2 N/A Kgm2

Use : Helical fans, EVP series are suitable for suction of fumes and dirty, dusty and wet air in foundries, cement factories, paper mills and woodworking works.
For ventilation of local rooms, radiator, unit heaters, cooling towers, etc. It is used in applications for drying paper, wool, pasta tiles and generally where large volumes of air must be conveyed at low pressure.

– Easy setup

– High energy saving

– Silent

– Made with high quality raw materials

– Long years of use guarantee