Max. air temperature : 80 ° C
ErP : These fans are within the scope of Directive 2009/125 / EC. This law does not apply in the following cases:
- Working in potentially explosive atmospheres (ATEX)
- Operation at high temperatures (fans designed with cooling fan)
- Operation at temperatures below -40°C
- Working in toxic, corrosive or corrosive environments (use of materials such as AISI 304, AISI 316, manganese steels).
These series are centrifugal backward curved fans and therefore Ntarget = 61 is expected (Reg. UE N.327 / 2011).
Efficiency IE2 motors conforming to IEC 60034-30 are taken into account in ErP calculations.
Please note that these fans are designed to carry material. For this reason, Directive 2009/125/CE applies, but is not subject to the energy efficiency restrictions it imposes and thus the verification of these parameters.
Product Technical Information
AIR FLOW | 7.1 – 22 m3/min |
INPUT PRESSURE | 680 – 689 kg/m2 |
OUTPUT PRESSURE | 728 – 736 kg/m2 |
ENGINE BOARD | 132 S – 2 poles |
INSTALLED POWER | 5.5 kW |
ROTATION SPEED | 2900 rpm |
SPEED LIMIT | 2950 rpm |
LIQUID TYPE | Material transfer |
INLET FLANGE | ⌀205mm |
OUTLET FLANGE | 160x112mm |
WEIGHT WITHOUT MOTOR | 80 Kg |
SE 2 | 3.2 Kg2 |
Use : For the aspiration of very dusty air containing various types of materials.
The usage level of this fan series is very high in the following industries:
sawmill / joinery : for the transport of sawdust and wood chips;
tanneries : for conveying leather coatings and wood chips;
Bookbindings : For the transport of paper trammings;
textile industry : for the transport of yarn waste and long fibers;
plastic processing industries : for conveying granules and nylon parts; solid combustible materials into boilers etc. available for download.
– Easy setup
– High energy saving
– Silent
– Made with high quality raw materials
– Long years of use guarantee
– High efficiency
– Excess transport capacity