The temperature of the absorbed liquid should not exceed 90 ° C. A small heat-stop fan is threaded on the shaft between the support and the spiral for temperatures of the transported liquid from 90°C to higher than 350°C; In addition, the fan is painted with special aluminum paint suitable for high temperatures.
ErP : These fans are within the scope of Directive 2009/125 / EC. This law does not apply in the following cases:
- Working in potentially explosive atmospheres (ATEX)
- Operation at high temperatures (fans designed with cooling fan)
- Operation at temperatures below -40°C
- Working in toxic, corrosive or corrosive environments (use of materials such as AISI 304, AISI 316, manganese steels).
These series are centrifugal backward curved fans and therefore Ntarget = 61 is expected (Reg. UE N.327 / 2011).
Efficiency IE2 motors conforming to IEC 60034-30 are taken into account in ErP calculations.
Product Technical Information
|AIR FLOW||8 – 30 m3/min|
|INPUT PRESSURE||119 – 232 kg/m2|
|OUTPUT PRESSURE||121 – 238 kg/m2|
|ENGINE BOARD||N/A – N/A poles|
|INSTALLED POWER||N/A KW|
|ROTATION SPEED||2830 rpm|
|SPEED LIMIT||4500 rpm|
|LIQUID TYPE||Clean, Dusty|
|WEIGHT WITHOUT MOTOR||48 Kg|
|SE 2||0.28 Kgm2|
Use : For absorbing very dusty air containing various types of material in suspension. The main feature of such fans is the high output relationship (due to the special profile resulting from the use of a reverse blade rotor) with the suction of dusty fluids or those containing granular material.
Also these fans are characterized by a very flat curve of the absorbed power so that the motor is not overloaded when running with open inlets.
They are installed in joinery to transport saw dust and wood shavigs, excluding filamentous material, in mechanical industries to absorb metal chips, pneumatic conveying of cement plants, ceramic plants, mills, feed mills, tanneries, foundries, textile and chemical. It can be easily used in industries where it is necessary to transport harmful air with low and medium pressure, and in all these applications in general.
– Easy setup
– High energy saving
– Made with high quality raw materials
– Long years of use guarantee
– High efficiency