MPR 401


Project Description

The temperature of the sucked liquid should not exceed 80 ° C and 150 ° with the cooling fan.

ErP : These fans are within the scope of Directive 2009/125 / EC. This law does not apply in the following cases:

- Working in potentially explosive atmospheres (ATEX)
- Operation at high temperatures (fans designed with cooling fan)
- Operation at temperatures below -40°C

- Working in toxic, corrosive or corrosive environments (use of materials such as AISI 304, AISI 316, manganese steels).
These series are centrifugal backward curved fans and therefore Ntarget = 61 is expected (Reg. UE N.327 / 2011).
Efficiency IE2 motors conforming to IEC 60034-30 are taken into account in ErP calculations.

HAVA AKIMI

V = 380÷5.400 M3/SAAT

BASINÇ

PT = 150÷ 500 KG/M2

Product Technical Information

AIR FLOW 14 – 40 m3/min
INPUT PRESSURE 211 – 296 kg/m2
OUTPUT PRESSURE 215 – 305 kg/m2
ENGINE BOARD 90 L – 2 poles
INSTALLED POWER 2.2 kW
ROTATION SPEED 2850 rpm
SPEED LIMIT 2900 rpm
LIQUID TYPE Clean, Dusty
INLET FLANGE ⌀205mm
OUTLET FLANGE 180x125mm
WEIGHT WITHOUT MOTOR 32 Kg
SE 2 0.5 Kgm2

Use : For absorbing very dusty air containing various types of material in suspension. The main feature of such fans is the high output relationship (due to the special profile resulting from the use of a reverse blade rotor) with the suction of dusty fluids or those containing granular material.
Also these fans are characterized by a very flat curve of the absorbed power so that the motor is not overloaded when running with open inlets.
They are installed in joinery to transport saw dust and wood shavigs, excluding filamentous material, in mechanical industries to absorb metal chips, pneumatic conveying of cement plants, ceramic plants, mills, feed mills, tanneries, foundries, textile and chemical. It can be easily used in industries where it is necessary to transport harmful air with low and medium pressure, and in all these applications in general.

– Easy setup

– High energy saving

– Silent

– Made with high quality raw materials

– Long years of use guarantee

– High efficiency