EVF 1120/E – 60Hz

EVF 1120/E – 60Hz


Project Description

Minimum operating temperature - 20 ° C, maximum + 70 ° C.

ErP : These fans are within the scope of Directive 2009/125 / EC. This law does not apply in the following cases:
- Operation in potentially explosive atmospheres (ATEX)
- Operation at high temperatures (fans designed with cooling fan)
- Operation at temperatures below -40 °C
- Working in toxic, corrosive or corrosive environments (use of materials such as AISI 304, AISI 316, manganese steels).
These series are axial fans and therefore Ntarget = 50 is expected (Reg. UE N.327 / 2011).
Efficiency IE2 motors conforming to IEC 60034-30 are taken into account in ErP calculations.

HAVA AKIMI

V = 1.320 ÷ 120.000 M3/SAAT

BASINÇ

PT = 4 ÷ 100 KG/M2

Product Technical Information

AIR FLOW 600 – 900 m3/minute
INPUT PRESSURE 16 – 30 kg/m2
OUTPUT PRESSURE 16 – 30 kg/2
ENGINE BOARD 160 M – 8 poles
INSTALLED POWER 5.5 kW
ROTATION SPEED 860rpm
SPEED LIMIT 910 rpm
LIQUID TYPE Clean
INLET FLANGE ⌀1120mm
OUTLET FLANGE 1120 x N/A mm
WEIGHT WITHOUT MOTOR 190 Kg
SE 2 N/A Kgm2

Use : Helical fans, EVF series, are suitable for suction of dirty, dusty and wet air as well as fumes in foundries, cement plants, paper mills and woodwork.
For ventilation of local rooms, radiator, unit heaters, cooling towers, etc. In applications for drying paper, wool, pasta tiles and generally where large volumes of air must be conveyed at low pressure.

– Easy setup

– High energy saving

– Silent

– Made with high quality raw materials

– Long years of use guarantee