EVF 1000/D

EVF 1000/D


Project Description

Minimum operating temperature - 20 ° C, maximum + 70 ° C.

ErP : These fans are within the scope of Directive 2009/125 / EC. This law does not apply in the following cases:
- Operation in potentially explosive atmospheres (ATEX)
- Operation at high temperatures (fans designed with cooling fan)
- Operation at temperatures below -40 °C
- Working in toxic, corrosive or corrosive environments (use of materials such as AISI 304, AISI 316, manganese steels).
These series are axial fans and therefore Ntarget = 50 is expected (Reg. UE N.327 / 2011).
Efficiency IE2 motors conforming to IEC 60034-30 are taken into account in ErP calculations.

HAVA AKIMI

V = 1.320 ÷ 120.000 M3/SAAT

BASINÇ

PT = 4 ÷ 100 KG/M2

Product Technical Information

AIR FLOW 580 – 925 m3/minute
INPUT PRESSURE 25 – 65 kg/m2
OUTPUT PRESSURE 25 – 65 kg/m2
ENGINE BOARD 160 M – 4 poles
INSTALLED POWER 11 kW
ROTATION SPEED 1450 rpm
SPEED LIMIT 1500rpm
LIQUID TYPE Clean
INLET FLANGE ⌀1000mm
OUTLET FLANGE 1000 x N/A mm
WEIGHT WITHOUT MOTOR 175 Kg
SE 2 N/A Kgm2

Use : Helical fans, EVF series, are suitable for suction of dirty, dusty and wet air as well as fumes in foundries, cement plants, paper mills and woodwork.
For ventilation of local rooms, radiator, unit heaters, cooling towers, etc. In applications for drying paper, wool, pasta tiles and generally where large volumes of air must be conveyed at low pressure.

– Easy setup

– High energy saving

– Silent

– Made with high quality raw materials

– Long years of use guarantee