EVc 400

EVc 400


Project Description

Minimum operating temperature - 20 ° C, maximum + 70 ° C.

ErP : These fans are within the scope of Directive 2009/125 / EC. This law does not apply in the following cases:
- Operation in potentially explosive atmospheres (ATEX)
- Operation at high temperatures (fans designed with cooling fan)
- Operation at temperatures below -40 °C
- Working in toxic, corrosive or corrosive environments (use of materials such as AISI 304, AISI 316, manganese steels).
These series are axial fans and therefore Ntarget = 50 is expected (Reg. UE N.327 / 2011).
Efficiency IE2 motors conforming to IEC 60034-30 are taken into account in ErP calculations.

HAVA AKIMI

V = 2.300 ÷ 65.000 M3/SAAT

BASINÇ

PT = 6 ÷ 75 KG/M2

Product Technical Information

AIR FLOW 40 – 68 m3/min
INPUT PRESSURE 11 – 88 kg/m2
OUTPUT PRESSURE 11 – 88 kg/m2
ENGINE BOARD 71 A – N/A poles
INSTALLED POWER N/A KW
ROTATION SPEED 1400 rpm
SPEED LIMIT 2800 rpm
LIQUID TYPE Clean
INLET FLANGE ⌀400mm
OUTLET FLANGE 400 x N/A mm
WEIGHT WITHOUT MOTOR 21 Kg
SE 2 N/A Kgm2

Use : Helical electric fans of type EVc are partially suitable for extraction of fumes and dirty, dusty and humid air.
This type of fan is mainly used in spray booths, where it offers a significant safety guarantee against fire hazard due to the special construction with rotor made of spark-proof material and the motor fixed on the outside of the fan.

– Easy setup

– High energy saving

– Silent

– Made with high quality raw materials

– Long years of use guarantee