Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the really-simple-ssl domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version in /home/euroofa/public_html/wp-includes/functions.php on line 6114
EUK 451 – Euroofan

EUK 451


Project Description

The temperature of the sucked liquid should not exceed 80°C without cooling fan and 150°C with cooling fan. For higher temperatures it is necessary to make some changes in the structure of the fan.

ErP : These fans are within the scope of Directive 2009/125 / EC. This law does not apply in the following cases:

- Working in potentially explosive atmospheres (ATEX)
- Operation at high temperatures (fans designed with cooling fan)
- Operation at temperatures below -40°C

- Working in toxic, corrosive or corrosive environments (use of materials such as AISI 304, AISI 316, manganese steels).
These series are centrifugal backward curved fans and therefore Ntarget = 61 is expected (Reg. UE N.327 / 2011).
Efficiency IE2 motors conforming to IEC 60034-30 are taken into account in ErP calculations.

HAVA AKIMI

V = 800÷150.000 M3/SAAT

BASINÇ

PT = 70÷1095 KG/M2

Product Technical Information

AIR FLOW 45 – 160 m3/min
INPUT PRESSURE 155 – 327,799988 kg/m2
OUTPUT PRESSURE 198 – 341.5 kg/m2
ENGINE BOARD 132 SB – 2-pole
INSTALLED POWER 7.5 kW
ROTATION SPEED 2930 rpm
SPEED LIMIT 2960 rpm
LIQUID TYPE Clean, Dusty, Material transfer.
INLET FLANGE ⌀361mm
OUTLET FLANGE 355x250mm
WEIGHT WITHOUT MOTOR 85 Kg
SE 2 1.1 Kgm2

Use : For absorbing very dusty air containing various types of material in suspension. The main feature of such fans is that high efficiency (resulting from the use of an inverted blade rotor, special profile) is associated with the suction of powdery liquids or those containing granular materials. Also these fans are characterized by a very flat curve of the absorbed power so that the motor is not overloaded when running with open inlets.
They are installed in joinery to transport saw dust and wood shavigs, excluding filamentous material, in mechanical industries to absorb metal chips, pneumatic conveying of cement plants, ceramic plants, mills, feed mills, tanneries, foundries, textile and chemical. It is used in industries where it is necessary to transport harmful air at low and medium pressure, and in all these applications in general.

– Easy setup

– High energy saving

– Silent

– Made with high quality raw materials

– Long years of use guarantee

– High efficiency