EUC 631


Project Description

A small heat-stop fan is threaded on the shaft between the support and the spiral for temperatures of the transported liquid from 90°C to higher than 350°C; In addition, the fan is painted with special aluminum paint suitable for high temperatures.

ErP : These fans are within the scope of Directive 2009/125 / EC. This law does not apply in the following cases:

- Working in potentially explosive atmospheres (ATEX)
- Operation at high temperatures (fans designed with cooling fan)
- Operation at temperatures below -40°C

- Working in toxic, corrosive or corrosive environments (use of materials such as AISI 304, AISI 316, manganese steels).
These series are centrifugal backward curved fans and therefore Ntarget = 61 is expected (Reg. UE N.327 / 2011).
Efficiency IE2 motors conforming to IEC 60034-30 are taken into account in ErP calculations.

HAVA AKIMI

V = 600÷210.000 M3/SAAT

BASINÇ

PT = 60÷900 KG/M2

Product Technical Information

AIR FLOW 125 – 426 m3/minute
INPUT PRESSURE 320 – 623 kg/m2
OUTPUT PRESSURE 407 – 670 kg/m2
ENGINE BOARD N/A – N/A poles
INSTALLED POWER N/A KW
ROTATION SPEED 2960 rpm
SPEED LIMIT 3150 rpm
LIQUID TYPE Clean, Dusty, Material transfer.
INLET FLANGE ⌀506mm
OUTLET FLANGE 500x355mm
WEIGHT WITHOUT MOTOR 220 Kg
SE 2 6.5 Kgm2

Use : For absorbing very dusty air containing various types of material in suspension. The key feature of these new fan types is the high output relationship (due to the special profile resulting from the use of a reverse blade rotor) to the suction of dusty liquids or those containing granular materials. Also these fans are characterized by a very flat curve of the absorbed power so that the motor is not overloaded when running with open inlets.
They are installed in joinery to transport saw dust and wood shavigs, excluding filamentous material, in mechanical industries to absorb metal chips, pneumatic conveying of cement plants, ceramic plants, mills, feed mills, tanneries, foundries, textile and chemical. It can be easily used in industries where it is necessary to transport harmful air with high and medium pressure, and in all these applications in general.

– Easy setup

– High energy saving

– Silent

– Made with high quality raw materials

– Long years of use guarantee