Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the really-simple-ssl domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version in /home/euroofa/public_html/wp-includes/functions.php on line 6114
EU 221 – Euroofan

EU 221


Project Description

The temperature of the fluid should be above 80 °C and 150 °C with the cooling fan as sucked. For higher temperatures it is necessary to make some changes in the structure of the fan.

ErP : These fans are within the scope of Directive 2009/125 / EC. This law does not apply in the following cases:

- Operation in potentially explosive atmospheres (ATEX)
- Operation at high temperatures (fans designed with cooling fan)
- Operation at temperatures below -40 °C

- Working in toxic, corrosive or corrosive environments (use of materials such as AISI 304, AISI 316, manganese steels).
These series are centrifugal backward curved fans and therefore Ntarget = 61 is expected (Reg. UE N.327 / 2011).
Efficiency IE2 motors conforming to IEC 60034-30 are taken into account in ErP calculations.

HAVA AKIMI

V = 380÷48.000 M3/SAAT

BASINÇ

PT = 55÷530 KG/M2

Product Technical Information

AIR FLOW 6.3 – 14 m3/min
INPUT PRESSURE 42 – 79 kg/m2
OUTPUT PRESSURE 42 – 79 kg/m2
ENGINE BOARD 63 A – 2 poles
INSTALLED POWER 0.18 kW
ROTATION SPEED 2750 rpm
SPEED LIMIT 2800 rpm
LIQUID TYPE Clean, Dusty, Material transfer.
INLET FLANGE ⌀129mm
OUTLET FLANGE 140x100mm
WEIGHT WITHOUT MOTOR 12 Kg
SE 2 0.05 Kgm2

Use : For absorbing very dusty air containing various types of material in suspension. The main feature of such fans is the high output relationship (due to the special profile resulting from the use of a reverse blade rotor) with the suction of dusty fluids or those containing granular materials.
Also these fans are characterized by a very flat curve of the absorbed power so that the motor is not overloaded when running with open inlets.
They are installed in joinery to transport saw dust and wood shavigs, excluding filamentous material, in mechanical industries to absorb metal chips, pneumatic conveying of cement plants, ceramic plants, mills, feed mills, tanneries, foundries, textile and chemical. Industries where it is necessary to transport harmful air at low and medium pressure, and in all these applications in general.

– Easy setup

– High energy saving

– Silent

– Made with high quality raw materials

– Long years of use guarantee