The liquid temperature should not exceed 80 °C without the conveyed cooling fan and 150 °C cooling. For higher temperatures, it is necessary to change the structure of the fan. ErP : These fans are within the scope of Directive 2009/125 / EC. This law does not apply in the following cases:
- Operation in potentially explosive atmospheres (ATEX)
- Operation at high temperatures (fans designed with cooling fan)
- Operation at temperatures below -40 °C
- Working in toxic, corrosive or corrosive environments (use of materials such as AISI 304, AISI 316, manganese steels).
These series are centrifugal forward curved fans and therefore Ntarget = 42 is expected (Reg. UE N.327 / 2011).
Efficiency IE2 motors in accordance with IEC 60034-30 are taken into account in ErP calculations.
Product Technical Information
| AIR FLOW | 12 – 40 m3/min |
| INPUT PRESSURE | 40 – 48 kg / m2 |
| OUTPUT PRESSURE | 40 – 48 kg / m2 |
| ENGINE BOARD | 80 A – 4 poles |
| INSTALLED POWER | 0.55 kW |
| ROTATION SPEED | 1370 laps/min |
| LIMIT SPEED | 1420 laps/min |
| LIQUID TYPE | Clean, Dusty |
| INLET FLANGE | ⌀ 255mm |
| OUTLET FLANGE | 250 x 180mm |
| WEIGHT WITHOUT MOTOR | 22 Kg |
| SE 2 | 0.1 Kgm2 |
Use : To remove clean or slightly dusty air. They have high efficiency and low noise level, fans of this series are suitable for ventilation, air-conditioning, drying, cooling, mechanical airflow and poisonous gas.
It is widely used in removal plants.
– High energy saving
– Silent
– Made with high quality raw materials
-Long years of use guarantee