APRED 1003/A

APRED 1003/A


Project Description

These fans are covered by Directive 2009/125 / EC. This law does not apply in the following cases:
- Operation in potentially explosive atmospheres (ATEX)
- Operation at high temperatures (fans designed with cooling fan)
- Operation at temperatures below -40 °C
- Working in toxic, corrosive or corrosive environments (use of materials such as AISI 304, AISI 316, manganese steels).
special rate> In the case of 1.11, please note that Directive 2009/125 / CE applies, but these fans are not subject to the energy efficiency restrictions imposed and thus the verification of these parameters.
The APRED-APRFD-APRGD series always has a specific ratio greater than 1.11.

HAVA AKIMI

V = 600÷4.260 M3/H

BASINÇ

P = 1.450÷4.760 KG/M2

Product Technical Information

AIR FLOW 16 – 40 m3/min
INPUT PRESSURE 2400 – 2440 kg/m2
OUTPUT PRESSURE 3030 – 3103 kg/m2
ENGINE BOARD 200 L – 2 poles
INSTALLED POWER 30 kW
ROTATION SPEED 2950 rpm
SPEED LIMIT 3000 rpm
LIQUID TYPE Clean
INLET FLANGE ⌀228mm
OUTLET FLANGE 180x125mm
WEIGHT WITHOUT MOTOR 750 Kg
SE 2 30 Kgm2

Use : For suction of clean and dusty air. Double-stage fans of this type are characterized by high output, which saves a certain amount of electrical power; using special type fan impellers with reverse blades (negative).
In order to give oxygen to polluted waters, in pneumatic transport, cement factories, mills, “pasta” factories, paint works (for quick drying wool), ceramics factories (used for pneumatic cleaning of rooms), chemical, iron and in metallurgical industries. Fluid temperature should be above 80 °C.

– High energy saving

– Silent

– Made with high quality raw materials

-Long years of use guarantee