APRI 1002/B

APRI 1002/B


Project Description

The temperature of the fluid should be above 80 °C without cooling to 150 °C by fan and cooling fan not sucked. ErP : These fans are within the scope of Directive 2009/125 / EC. This law does not apply in the following cases:

- Working in potentially explosive atmospheres (ATEX)
- Operation at high temperatures (fans designed with cooling fan)
- At temperatures below -40°C
work - Working in toxic, corrosive or corrosive environments (use of materials such as AISI 304, AISI 316, manganese steels).
These series are centrifugal backward curved fans and therefore Ntarget = 61 is expected (Reg. UE N.327 / 2011).
Efficiency IE2 motors conforming to IEC 60034-30 are taken into account in ErP calculations.
special rate> In the case of 1.11, please note that Directive 2009/125 / CE applies, but these fans are not subject to the energy efficiency restrictions imposed and thus the verification of these parameters.

HAVA AKIMI

V = 3.780 ÷ 54.000 M 3 / SAAT

BASINÇ

PT 150 ÷ 1.880 KG / = 2

Product Technical Information

AIR FLOW 315 – 500 m3/min
INPUT PRESSURE 1335 – 1420 kg/m2
OUTPUT PRESSURE 1565 – 1720 kg/m2
ENGINE BOARD 315 M – 2 poles
INSTALLED POWER 160 kW
ROTATION SPEED 2950 rpm
SPEED LIMIT 3000 rpm
LIQUID TYPE Clean
INLET FLANGE ⌀638mm
OUTLET FLANGE 560x400mm
WEIGHT WITHOUT MOTOR 418 Kg
SE 2 32 Kgm2

Use : For suction of clean and dusty air. Such high-pressure fans are characterized by a high output, which saves electrical energy, as they have a special fan impeller mounted with reverse blades (negative).
This type of fans is particularly suitable for pneumatic conveying of small capacities in cement plants, in the air supply of cupolas in foundries and oil burners, in mills, in “pasta” factories, in the chemical, metallurgical and iron industries. medium and high pressures are required.

– Easy setup

– High energy saving

– Silent

– Made with high quality raw materials

– Long years of use guarantee