BPRDc 801.1

BPRDc 801.1


Project Description

With the use of C3 hollow bearings, it is possible to absorb fluids at a temperature higher than 40 °C up to a maximum of 80 °C.

ErP : These fans are within the scope of Directive 2009/125 / EC. This law does not apply in the following cases:
- Working in potentially explosive atmospheres (ATEX)
- Operation at high temperatures (fans designed with cooling fan)
- Operation at temperatures below -40°C

- Working in toxic, corrosive or corrosive environments (use of materials such as AISI 304, AISI 316, manganese steels).
These series are centrifugal backward curved fans and therefore Ntarget = 61 is expected (Reg. UE N.327 / 2011).
Efficiency IE2 motors conforming to IEC 60034-30 are taken into account in ErP calculations.

HAVA AKIMI

V = 6.000 ÷ 300.000 M3/SAAT

BASINÇ

PT = 22÷350 KG/M2

Product Technical Information

AIR FLOW 510 – 1360 m3/min
INPUT PRESSURE 102 – 248 kg/m2
OUTPUT PRESSURE 102 – 248 kg/m2
ENGINE BOARD N/A – N/A poles
INSTALLED POWER N/A KW
ROTATION SPEED 1480 rpm
SPEED LIMIT 1250 rpm
LIQUID TYPE Clean
INLET FLANGE ⌀1600mm
OUTLET FLANGE 1120x800mm
WEIGHT WITHOUT MOTOR 530 Kg
SE 2 35 Kgm2

Use : for extracting large volumes of clean or slightly dusty air in civil and industrial air-conditioning plants.
This series of double-suction fans with reverse curved blade rotors, therefore having very high outputs, finds wide use in the suction of degraded air, solvent vapors, hazardous gases; aeration of feed and grain in silos and buildings; tile and ceramic drying etc. In all applications where it is necessary to transport air, gas or fumes at low pressure at a maximum temperature of 40 °C.

– Easy setup

– Providing bidirectional absorption

– Silent

– High energy saving

– Made with high quality raw materials

– Long years of use guarantee