Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the really-simple-ssl domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version in /home/euroofa/public_html/wp-includes/functions.php on line 6114
APRH 632/B – Euroofan

APRH 632/B

APRH 632/B


Project Description

The temperature of the sucked liquid should not exceed 80°C without cooling fan and 150°C with cooling fan.

ErP : These fans are within the scope of Directive 2009/125 / EC. This law does not apply in the following cases:

- Working in potentially explosive atmospheres (ATEX)
- Operation at high temperatures (fans designed with cooling fan)
- Operation at temperatures below -40°C

- Working in toxic, corrosive or corrosive environments (use of materials such as AISI 304, AISI 316, manganese steels).
These series are centrifugal backward curved fans and therefore Ntarget = 61 is expected (Reg. UE N.327 / 2011).
Efficiency IE2 motors conforming to IEC 60034-30 are taken into account in ErP calculations.
special rate> In the case of 1.11, please note that Directive 2009/125 / CE applies, but these fans are not subject to the energy efficiency restrictions imposed and thus the verification of these parameters.

HAVA AKIMI

V = 1.680÷48.000 M3/SAAT

BASINÇ

PT = 112÷1.950 KG/M2

Product Technical Information

AIR FLOW 71 – 160 m3/min
INPUT PRESSURE 540 – 660 kg/m2
OUTPUT PRESSURE 555 – 710 kg/m2
ENGINE BOARD 160 L – 2 poles
INSTALLED POWER 18.5 kW
ROTATION SPEED 2900 rpm
SPEED LIMIT 2950 rpm
LIQUID TYPE Clean
INLET FLANGE ⌀321mm
OUTLET FLANGE 315x224mm
WEIGHT WITHOUT MOTOR 157 Kg
SE 2 3.2 Kgm2

Use : For suction of clean and dusty air. Such high-pressure fans are characterized by a high output, which saves electrical energy, as they have a special fan impeller mounted with reverse blades (negative).
This type of fans is particularly suitable for pneumatic conveying of small capacities in cement plants, in the air supply of cupolas in foundries and oil burners, in mills, in “pasta” factories, in the chemical, metallurgical and iron industries. medium and high pressures are required.

– Easy setup

– High energy saving

– Silent

– Made with high quality raw materials

– Long years of use guarantee